AP MGMT port settings
Hello,In XIQ - Manage - Devices - select device - Configure (left panel) - Device configuration - Management Interface (Mgt0) - how to change globaly for all AP's from static IP to DHCP ??Thanks in advance
Forum Posts
The CPU utilization of AP130 and AP250 is at 99%
* firmware AP 250 - 8.2.4.0AP 130 - 6.5.7.0 Are there any known cases where a spike in network traffic or interference from nearby devices on the 2.4GHz channel causes excessive event log accumulation, leading to a significant increase in CPU utiliza...
Resolved! Chromecast is not connecting or streaming on Aerohive Classic
They asked me to place a Chromecast on the network that we have with Aerohive Classic, but when I try to connect it it just won't let me, do you know if it is necessary to enable any option in the Network Policy?
couldn't reach ia-gcp-idm.extremecloud iq
Hello team, We are in a trouble only in one SSID that uses 802.1x and authentication logs shows: incorrect password, and the users cant connect wifi(but they are using correct pass). I already clean cache capwap, upgrade firmware, reboot, back WPA3 t...
AP230 with HiveOS 6.1r5 update issues
Dear all,got my fingers on an AP230. Hardware is looking fine, but I have some connection issues so I wanted to try if firmware upgrade will improve. It is running on 6.1r5, but I cannot upgrade. In this board I learned that I first have to upgrade t...
