Buend dÃa estimados.Habrá alguna manera para poder recuperar la contraseña de un access point 7532 mediante CLI sin perder la configuración que esta tiene actualmente.
I am trying to setup 3 AP7523’s. 2 of them will be cabled to the rest of my network and the 3rd will be stand-alone. The 3rd stand-alone unit is on the far side of a warehouse so it will not be cabled to the main network. This 3rd AP will have a P...
Hello. I have ~10 AccessPoints AP410i (wing 7.7.1.8-009R) which work in same domain and select virtual controller via option "Enable auto election of VC".Created some vlan, linked to Wlan - Radio2 (5hz).I see and can connect to my SSID, get ip addres...
Hi all. I have a deployment where there are AP310i version 7.7.0.0 and NX5500 running WING 7.9.6.1. the 1. problem is that when the AP boots its stuck at "AP adoption discovery process in progress... To cancel and boot in Standalone mode, type (s): ...
I'm trying to troubleshoot a remote site where the APs are not electing an RF domain manager (each assumes itself is) and trying to learn more about the protocol but haven't been able to find any retailed information on how the protocol works. Does a...
