2017-10-16: New GTAC Knowledge Articles October 08 - 14, 2017

  • 0
  • 1
  • Article
  • Updated 1 year ago
Here are the new articles that were published October 08 - October 14, 2017 in GTAC Knowledge:

Sunday, October 08, 2017:
none

Monday, October 09, 2017:
How do I increase the amount of stored flows on an ExtremeAnalytics appliance (Purview, Application Analytics)?
How to protect the management on a 200 Series Switch
AP - Controller GUI Report Shows AP's with Problems
What are your Extreme Networks MAC Address Vendor Codes?
100G QSFP28 10m active optical cable is showing Low Alarm on Rx Power
Can you install a trial license on a Summit X430-8p running a Summitlite EXOS image?

Tuesday, October 10, 2017:
Port descriptions are not populating in NetSight for EXOS switches
How To Use Weight to Control Which BGP Peer is Primary and Backup on an S-Series
How to Configure anS-Series for Redundancy Between to BGP Peersand an OSPF Router inCase Both BGP Routers Fail
What is the United States (US) Export Control Classification Number (ECCN) and country of origin for the AP-7532-67030-EU and AP-7532-67040-EU?
How to Copy a Wireless Controller's Configuration to a Flash Drive Using CLI
Alarm RADAR DETECTED appears
Does 200 series support advanced packet filtering?

Wednesday, October 11, 2017:
How to enable logging on Microsoft Windows Server for RADIUS requests failure and success messages
Sites not saving properly if the SNMP Profile public_v2_Profile is deleted
Subscription Licensing in NetSight Extreme Management Center
widgets missing from NSIGHT Dashboard
Why access points are denied from adoption with adoption throttled message?
L3 VLAN is shown under OSPF interfaces even if it is not added to OSPF
How to create DiffServ auto classification on 200 series
Active Directory Servers Logging "NETLOGON" Errors from NAC Appliances

Thursday, October 12, 2017:
BGP Route shows Rejected in Route Table
WS-AP3965e, WS-AP3765e Portal Access Points are losing connections and failing over to the backup ExtremeWireless appliance.
How to use OUI-based auto-voip feature on 200 series?
How to set banner for 200 series
Why it is recommended to use level 2 MiNT links deployment for remote sites?
How to export AP inventory from Extreme Wireless Controller

Friday, October 13, 2017:
How to set or delete ADSP domain name
WiNG NX-5500 controller has corrupt MAC Address starting with 00-00-00
ACL meter doesn't work in cut-through switching mode.
Where Are The Fusion Module XML Files Located In Version 8 NetSight / EMC
AP test NSight feature showing "Unable to find a sensor for the target" error
Will a compass search in Extreme Management Center also search devices for other users groups
Do the AP3912i wired ports support 802.1x?
How to SSH or open the AP's Remote Console from the Wireless Controller
How to set up AP7622/7602 to be 2x2 single radio.
***** ERROR: Could not mount /config filesystem
IPv4 Traffic not Forwarding

Saturday, October 14, 2017:
none
Photo of Thomas, Ken

Thomas, Ken, Alum

  • 4,368 Points 4k badge 2x thumb

Posted 1 year ago

  • 0
  • 1

Be the first to post a reply!