AP8432 PoE Out GE2

  • 1
  • 1
  • Question
  • Updated 7 months ago
  • Answered
for AP8432 the PoE output via GE2 its not working, do I need to configure it or is enabled by default. BR
Photo of Ismael

Ismael

  • 488 Points 250 badge 2x thumb

Posted 7 months ago

  • 1
  • 1
Photo of Alona

Alona, Employee

  • 1,770 Points 1k badge 2x thumb
You need to have 3at power to power up the AP and they you do need to configure poe out on ge2.
Photo of Ismael

Ismael

  • 488 Points 250 badge 2x thumb
thanks for your answer.
Im using the PoE AP-PSBIAS-2P3-ATR but the GE2 cant power an AP7532.

BR
Photo of Andrew Blomley

Andrew Blomley, Employee

  • 1,042 Points 1k badge 2x thumb
can you add the command on GE2

power best-effort
Photo of Ismael

Ismael

  • 458 Points 250 badge 2x thumb
any other option to make it work?

BR
Photo of Ismael

Ismael

  • 488 Points 250 badge 2x thumb
yes i did it but this message appears:
ap8432(config-device-if-ge2)#power best-effort
% Error: POE power best effort configuration not available on device type [ap8432].

thank you for your support
(Edited)
Photo of Andrew Blomley

Andrew Blomley, Employee

  • 1,042 Points 1k badge 2x thumb
 I don't have the AP8432, but tested the following on the AP7612 

ap7612-3B376E(config-profile-default-ap7612)#service power-config 3af-out
ap7612-3B376E(config-profile-default-ap7612)#com w

the power then come up 

sorry for the delay 

needed to find the AP 
Photo of Ismael

Ismael

  • 488 Points 250 badge 2x thumb
Yey!!!! its working!!! thank you so much, i will use more "The HUB"

BR