Dual Mode and voice vlan not working properly on brocade switch

  • 0
  • 1
  • Problem
  • Updated 5 months ago
  • Solved

Hello, We had cisco callmanager phone system. Using Brocade ICX 7450 switch with following config

 

vlan 10 by port

tagged ethe 1/1/1 to 1/1/46 ethe 1/1/48 ethe 1/2/1 to 1/2/4 ethe 2/1/1 to 2/1/16 ethe 2/1/25 to 2/1/36 ethe 2/2/1 to 2/2/4

untagged ethe 2/1/19 to 2/1/24 ethe 2/1/37 to 2/1/44
router-interface ve 10

 

vlan 100 by port
tagged ethe 1/1/1 to 1/1/46 ethe 1/1/48 ethe 1/2/1 to 1/2/4 ethe 2/1/1 to 2/1/16 ethe 2/2/1 to 2/2/4
router-interface ve 100

 

 

interface ethernet 1/1/29
port-name DESKTOP-PHONE
dual-mode 10
inline power power-limit 15400
voice-vlan 100

 

This worked fine. Phone got correct IP address in vlan 100, PC got correct IP address in vlan 10

 

Switching to Mitel phone system this weekend. Created Vlan 90 for the Mitel phones with an address range of 10.8.90.x /24

Still using Vlan 10 (as above) for desktops

 

Removed Tagged ports from vlan100. This removed the voice-vlan from each port

 

Added tagged ports to vlan 90 

vlan 90 name MID-Mitel_Phones by port
tagged ethe 1/1/1 to 1/1/46 ethe 1/1/48 ethe 1/2/1 to 1/2/4 ethe 2/1/1 to 2/1/16 ethe 2/1/25 to 2/1/36 ethe 2/2/1 to 2/2/4
untagged ethe 1/1/47
router-interface ve 90

 

New config on port looks like this

interface ethernet 1/1/29
port-name DESKTOP-PHONE
dual-mode 10
inline power power-limit 15400
voice-vlan 90

 

When we plug Mitel phones in they get an address in vlan 10 instead of vlan 90

If we plug cisco phone back in, it gets address in vlan 90 like it is supposed to. 

 

What am I missing
Photo of Rick Elliott

Rick Elliott

  • 70 Points

Posted 5 months ago

  • 0
  • 1
Photo of Grosjean, Stephane

Grosjean, Stephane, Employee

  • 13,676 Points 10k badge 2x thumb
Hi,
I think you are on the wrong forum. ICX is not a product of Extreme Networks.