How to set Ridgeline temperature threshold

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
Hi,
we're receiving Overheat messages at 34 degrees from Ridgeline and want to set the threshold for these messages to 38 degrees. How can we do this?:

Alarm Message: Core/Stack SNMP Trap Overheat 
sysDescr.0: ExtremeXOS (Stack) version 15.3.3.5 v1533b5-patch1-10 by release-manager on Fri May 23 15:29:58 EDT 2014
extremeCurrentTemperature.0: 34
Photo of Roxelchen

Roxelchen

  • 90 Points 75 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Hernandez, Joshua

Hernandez, Joshua, Employee

  • 1,564 Points 1k badge 2x thumb
Roxelchen,

Which version of Ridgeline is in use?
Photo of Hernandez, Joshua

Hernandez, Joshua, Employee

  • 1,564 Points 1k badge 2x thumb
Roxelchen,

This is not possible in Ridgeline 4.0 but can be done in 3.1.  See the link below, starting on page 328 is the information for configuring thresholds:

http://extrcdn.extremenetworks.com/wp-content/uploads/2014/02/Ridgeline3.1_SP3_ReferenceGuide.pdf
Photo of Roxelchen

Roxelchen

  • 90 Points 75 badge 2x thumb
Thanks, i already tried this option but was unable to archive my goal.
Could you help me with the exact settings for Overheat to set them to 39 degrees ?