How to setup bridge at controller

  • 0
  • 1
  • Question
  • Updated 2 years ago
  • Answered
We are currently running on Bridge at the AP and would like to move to Bridge at the Controller for one of our wireless VLANs.

I'm just looking on how to start. 
Photo of Jeremy Bullock

Jeremy Bullock

  • 324 Points 250 badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Rich Upshaw

Rich Upshaw

  • 1,140 Points 1k badge 2x thumb
Go to the VNS tab and start with Topologies.  (version 8-9) for version 10 code controllers it may be slightly different.  The topology is where you specify your B@AP or B@controller.
Photo of Careno, Ryan

Careno, Ryan, Employee

  • 1,092 Points 1k badge 2x thumb
The VLAN being used must be tagged from the controller to your router which will be the default gateway for the clients, and accordingly have DHCP setup for the subnet.  Typically you would need to create a new topology with the VLAN information and assign it at the Role Level (most common) as a Contain to VLAN X which will point to your new B@HWC topology.  

Ryan