No Backup Tunnel

  • 0
  • 1
  • Problem
  • Updated 3 years ago
Hi, I have 2 virtual Controller V2110 at Hyper V. They are in availability mode (fast failover). All APs in the same subnet as the physical Interfaces of both controllers are established the primary and backup tunnel. The APs there are not in the same subnet do not establish the backup tunnel. I changed the Tunnel MTU size to 1300 but it doesnt work.
Photo of Frank Richter

Frank Richter

  • 382 Points 250 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
I would suggest collecting the trace log packages on a few of your access points and provide them to GTAC support for review:

How to get those files:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Collect-Access-Point-Logging-Information-Trace-Bundle

Also get a tech support file from both your controllers:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Collect-a-Tech-Support-File-From-a-Wireless-Controller
(Edited)
Photo of Frank Richter

Frank Richter

  • 382 Points 250 badge 2x thumb
Thanks for fast response, we are searching in the customer network. If we are not successful so i will do so.
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
No problem Frank...  
Photo of Doug Hyde

Doug Hyde, Technical Support Manager

  • 20,514 Points 20k badge 2x thumb
Frank, 

Checking in to see if you needed any further assistance with this?