RFID Tag Reading

  • 0
  • 1
  • Question
  • Updated 7 months ago
  • Answered
  • (Edited)
One of Multi Speciality hospital, here using AP 7522E. Now Customer asking Support for RFID. Is this device support for RFID. If it possible how to configure. any documentation is there?. Or else Shall we go for any other third party software?

Photo of Saravanamurthy K

Saravanamurthy K

  • 966 Points 500 badge 2x thumb

Posted 7 months ago

  • 0
  • 1
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 5,638 Points 5k badge 2x thumb
Hi Saravanamurthy,

we do not support RFID explicitly on WiNG.
You may turn to some 3rd party solution supported on WiNG, like AeroScout or Ekahau.

For more details I'd strongly recommend you to contact local sales representative or business partner of yours.

Regards,
Ondrej
Photo of Saravanamurthy K

Saravanamurthy K

  • 966 Points 500 badge 2x thumb
Any other have document for configure the wing AP to AeroScout/Ekahau?
Photo of Alona

Alona, Employee

  • 1,700 Points 1k badge 2x thumb
Aeroscout/Ekahu is only supported on enterprise AP - not expess.
Photo of Saravanamurthy K

Saravanamurthy K

  • 966 Points 500 badge 2x thumb
Any Configuration document is available
Photo of Bin

Bin, Employee

  • 5,372 Points 5k badge 2x thumb
I do not think that we have the specific document for this topic.

But, you could check one configuration guide on 15.4.14

https://documentation.extremenetworks.com/WiNG/5.9.1/9035204_WiNG_5_9_1_WC_SRG.pdf?_ga=2.134905785.9...

Best regards,
Photo of Ondrej Lepa

Ondrej Lepa, Employee

  • 5,638 Points 5k badge 2x thumb
Hi,

Bin is correct, just pointing to wrong part of User guide.
See 8.7.5 Access Point Radio Configuration - Advanced Settings

In CLI you can do this using below commands
VX(config)#profile ap7532 default-ap7532
VX(config-profile-default-ap7532)#interface radio x

VX(config-profile-default-ap7532-if-radio2)#aeroscout mac <AA-BB-CC-DD-EE-FF> 
VX(config-profile-default-ap7532-if-radio2)#aeroscout forward ip 1.2.3.4 port 1234 (IP and port AeroScout server listens at)

VX(config-profile-default-ap7532-if-radio2)#ekahau mac <AA-BB-CC-DD-EE-FF>
VX(config-profile-default-ap7532-if-radio2)#ekahau forward ip 1.2.3.4 port 1968 (IP and port Ekahau server listens at) 
However, as Alona mentioned above, this is NOT supported at EXPRESS SKU!

Please use WiNG 5.9.1.4 to collect RTLS tag's data as this release contains certain fixes.

Regards,
Ondrej
(Edited)