Wing Express - restrict SSID to only part of access points

  • 1
  • 1
  • Question
  • Updated 8 months ago
  • Answered
We would like to use one Wing Express controller with roughly 50 AP7522 access points but I would like to restrict a certain SSID to only be in use on 25% of those access points. This would allow us to restrict the area of a specific SSID. Can this be realised with Wing Express or should I add a 2nd separate controller?
Photo of Ronald Groenewegen

Ronald Groenewegen

  • 294 Points 250 badge 2x thumb

Posted 8 months ago

  • 1
  • 1
Photo of JESUS REYES DIAZ

JESUS REYES DIAZ

  • 222 Points 100 badge 2x thumb
ok   first  at all , you need to apply  the  same  profile till then  apply  override  over  the  AP  that  you need  only  certain SSID.
Photo of Bin

Bin, Employee

  • 5,350 Points 5k badge 2x thumb
In WiNG Express, the configuration that are performed at the system level can be modified at Site level and Device level (which Jesus referenced). Site provide the ability to allow administrators to override Wireless LAN SSID names and VLAN assignments for Access Points assigned to the Site.

 In your case, you could put 25% of those APs in one site and the other APs use other site.

Best regards,
Photo of Ronald Groenewegen

Ronald Groenewegen

  • 294 Points 250 badge 2x thumb

Excellent, thanks guys for the input.

We are still in the design phase so this means I can continue my plan with a controller and 7522's.

I'm gonna start digging into the manual ;-)