650 with Link Aggregation Juniper can anybody tell me if 650 support link aggregation aka LACP Juniper , from what I see 650 supports only load sharing not load balance and does not support LACP of Juniper which is really disappointing.

[agroch]

set interfaces ae0 vlan-tagging

set interfaces ae0 aggregated-ether-options lacp active

set interfaces ae0 aggregated-ether-options lacp periodic slow

set interfaces ae0 unit 0 family ethernet-switching interface-mode trunk

set interfaces ae0 unit 0 family ethernet-switching vlan members all

which is real LACP config from Juniper does not work for 650

[agroch]

I see this:

State=Operational state; Chan=Channel;

Radio=Radio profile; U=up; D=down;

Name      MAC addr   Mode  State Chan(Width) VLAN  Radio   Hive                                                                                   SSID

----------- -------------- -------- ----- ------------- ---- ---------- --------                                                                               -- ----------

Mgt0    3485:8416:d740  -    U   -       1   -   VHM-SVK.                                                                               ..   -

Agg0    3485:8416:d743 backhaul  U   -       1   -   VHM-SVK.                                                                               ..   -

Eth0(agg0) 3485:8416:d740  -    U   -       -   -   VHM-SVK.                                                                               ..   -

Eth1(agg0) 3485:8416:d741  -    U   -       -   -   VHM-SVK.                                                                               ..   -

Red0    3485:8416:d742 backhaul  D   -       1   -   VHM-SVK.                                                                               ..   -

Wifi0    3485:8416:d750 access   U   11(20MHz)   - radio_n...   -                                                                                    -

Wifi0.1   3485:8416:d754 access   D   11(20MHz)   - radio_n... VHM-SVK.                                                                               .. BZAEDS_...

Wifi0.2   3485:8416:d755 access   U   11(20MHz)   - radio_n... VHM-SVK.   

with Juniper config:

description "AP650 Link Aggregation";

native-vlan-id 70;

unit 0 {

  family ethernet-switching {

    interface-mode trunk;

    vlan {

      members all;

    }

  }

}

this is not real LACP, when I use this:

description "AP650 Link Aggregation";

native-vlan-id 70;

aggregated-ether-options {

  lacp {

    active;

    periodic fast;

  }

}

unit 0 {

  family ethernet-switching {

    interface-mode trunk;

    vlan {

      members all;

    }

  }

}

does not work with 650 - any thoughts?