cancel
Showing results for 
Search instead for 
Did you mean: 

AP1130 - Coax 2,4GHz(1) not functionnal

AP1130 - Coax 2,4GHz(1) not functionnal

support188
New Contributor

Hi,

 

We found a "problem" with AP1130.

The 2.4GHz(1) coax port is not functionnal.

There is no wave from this coax port.

The 2.4GHz(0) is ok.

 

With 5GHz, the two coax ports are ok.

 

We found this problem on 3 different AP1130.

Different default radio profiles, and different VHM, and different antennas.

 

Regards,

 

Thibault.

1 ACCEPTED SOLUTION

dsouri
Contributor III

Hello Thibault,

 

I'd ask that you contact your reseller/distributor so that they may open a ticket and find resolution for you.

 

Alternatively, if you require any information about the reseller/distributor or have further questions, please email me directly at CommunityHelp@Aerohive.com and I will be happy to assist more directly.

 

Thank you,

David Souri

HiveCommunity Moderator

View solution in original post

1 REPLY 1

dsouri
Contributor III

Hello Thibault,

 

I'd ask that you contact your reseller/distributor so that they may open a ticket and find resolution for you.

 

Alternatively, if you require any information about the reseller/distributor or have further questions, please email me directly at CommunityHelp@Aerohive.com and I will be happy to assist more directly.

 

Thank you,

David Souri

HiveCommunity Moderator

GTM-P2G8KFN