AP150w ethernet configuration...

[sglassman]

Does anyone have any advice/experience with the AP150w Ethernet configuration? Specifically with radius-we are using an external radius server for all of our wifi but with this AP/Switch it appears we can only configure a single management IP and they share it between the wired/wireless side? On the radius side of things we may need to configure things differently for wired and wireless and I could not find a way to separate them or maybe there isn't a way which would be a big disappointment.

[fredfish]

Sorry I see the User Profile now that I saved everything.

Sam you are life saver, nothing like a last minute change in program to upset the IT folks. But, thanks to having these AP150's I'm going to be able to handle their request.

[fredfish]

Yes, sir! That gave me the option for the AP150W and it looks correct for the switch ports displayed.

Now I have all three ports setup as a specified port type. Just how do I use that port type to 'limit' access as a guest. I already have all the UserProfiles existing to do that but don't see where to assign it to these ports. Just the Authentication type of MAC or 802.1x

[samantha_lynn]

If you go to Configure and edit the network policy itself (gear icon next to the Network Policy when you highlight it)> Can you enable switching and see if that gives you more device template options?

[fredfish]

Sam, I really appreciate the help here. I was able to find the device templates but unfortunately my version only shows BR100 as devices available. Since I can't choose the AP150W, I gather I cannot manage this devices ports 😞

[samantha_lynn]

No, you can, that's why I was asking what HiveManager platform you're using, the instructions will depend on the platform. You are using HiveManager Classic so you'll want to go to Configuration> Open the Network Policy> Find Device Template and click Choose next to that> New> Name the device template> Click on Device Models and choose the AP150W> Save> Back on the Network Policy page highlight the port(s) you want to configure> Configure> New> Name the port template> Save> Back on the Network Policy page you should now see Port Types with the port template you just created> Click Add/Remove under User Profile> Add the user profile you want to apply to those ports.