cancel
Showing results for 
Search instead for 
Did you mean: 

At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.

alden_xu
New Contributor
At a site there are 6 AP230s. Two of them are close to each other but they can't hear each other under 2.4 and 5GHZ. have reboot them a couple of times and still no luck.
6 REPLIES 6

alden_xu
New Contributor

Also what type of the informtion can get from each scan?

alden_xu
New Contributor

5GHZ scan across many AP230 is very big problem for us. no scan and the information on the AP I think will be wrong.

The information I get is: Number of BGSCAN=0; Number of BGSCAN requested=232; Number of BGSCAN missed=231.

I have enabled all the backgroud settings if possible. We are using 6.5r8 goden version

alden_xu
New Contributor

 

Enable background scanning when there are clients connected and disable background scanning when connected clients are in a power-save state

ashley_finch
Contributor III

That there would be you issue as to why the acsp neighbor table is not populating if it is missing all of the scans.

 

What are the background scan settings in the radio profiles being used?

GTM-P2G8KFN