Can't connect to SSID with PPSK

[ewoud_denbreeij]

I am not able to connect to an SSID that requires an PPSK. I am able to with WPA2-Personal and Enterprise though.

I did a troubleshoot/diagnostic within the Hivemanager NG and it simply messages:

• Sta(at if=wifi0.1) is de-authenticated because of notification of driver
• Rx deauth (reason 1 <unspecified>, rssi -63dB)

I upgraded to AP to the latest firmware and update my WiFi driver to the latest version. No success.

The PPSK's are gathered from the cloud user database on Hivemanager NG.

Multiple AP's show this problem.

[ewoud_denbreeij]

IDM client: Enabled Per SSID

IDM Proxy IP: (hidden on purpose)

IDM proxy: Enabled

IDM server: cloud-ie-idmauth.aerohive.com

IDM server IP: 34.253.190.201

RUN state: Connected securely to the IDM server

IDM transport mode: TCP

Server destination Port: 2083

RadSec Certificate state: Valid

RadSec Certificate Issued: 2018-06-04 11:56:51 GMT

RadSec Certificate Expires: 2019-06-04 11:56:51 GMT

[ewoud_denbreeij]

All AP's are AP130 running 8.4r2. It's not happening on just a few AP's, it's on all 500+ of them, across 20 networks.

[erivai]

What is the AP model and version?

Do you have the output of show IDM (on the AP running RadSec)?

Thank you,

[ewoud_denbreeij]

No matter what AP, if it's defined as RADSEC proxy or not. I always get the reply that it's not an RADSEC proxy. Running the command you gave me.

[erivai]

Ewoud,

Please run the following command on the AP.

exec aaa idm-test radsec-proxy

Expected results:

AP not running RadSec proxy

The Aerohive device establish a TCP session with the ID Manager auth gateway successfully

AP running RadSec proxy

The RadSec proxy is connected to the ID Manager auth gateway.

Thank you,

Eastman