high collision on WIFI

[Anonymous]

high collision on WIFI

[samantha_lynn]

I just wanted to update this post to let you know 10.0r8 was released. Please let me know if you have any questions about the new IQ Engine version.

[w1f1n00b]

I'm seeing similar behavior but it's much less on buildings where I've pared down the number of 2.4 radios in use.

This first image is a location where all all APs are using a 2.4/5 config

This second image is a location where most are configured for 5/5 and 2.4 is setup mainly for coverage not density. This building actually has more APs and higher AP density than the first location.

[samantha_lynn]

There have been some reports of 8.4r11 also reporting incorrect information. As far as I know they haven't confirmed if this is the same issue, but I know 8.2r6 is stable and it was the recommended version for a while so it's a good stepping stone to fall back to while we wait for 10.0r8.

[greg_amato]

@Sam Pirok​  Also, any reason you're recommending 8.2r6? over 8.4r11, latest 8.x release? Thanks.