cancel
Showing results for 
Search instead for 
Did you mean: 

how do i add a new access point to our environment

how do i add a new access point to our environment

rrosebor
New Contributor
how do i add a new access point to our environment
1 ACCEPTED SOLUTION

samantha_lynn
Esteemed Contributor III

If you have HiveManager Classic (myhive.aerohive.com), you will want to go to Monitor> Device Inventory> Add.

 

If you are using HiveManager (formerly NG) (cloud.aerohive.com), you will want to go to Monitor> Add.

 

Once the AP is connected to your HiveManager (if you need assistance with getting the AP connected, I would recommend searching on the Hive Community for "CAPWAP" guides), push a complete configuration out to the AP with the network policy you want it to use. Once the AP reboots, it will be broadcasting your SSIDs and passing client traffic.

View solution in original post

1 REPLY 1

samantha_lynn
Esteemed Contributor III

If you have HiveManager Classic (myhive.aerohive.com), you will want to go to Monitor> Device Inventory> Add.

 

If you are using HiveManager (formerly NG) (cloud.aerohive.com), you will want to go to Monitor> Add.

 

Once the AP is connected to your HiveManager (if you need assistance with getting the AP connected, I would recommend searching on the Hive Community for "CAPWAP" guides), push a complete configuration out to the AP with the network policy you want it to use. Once the AP reboots, it will be broadcasting your SSIDs and passing client traffic.

GTM-P2G8KFN