I have update my AP230 to 10.0.r5 and now the wifi 0 and 1 power are no longer being auto adjusted. that setting was done with a template.

[andrew_linville]

I have update my AP230 to 10.0.r5 and now the wifi 0 and 1 power are no longer being auto adjusted. that setting was done with a template.

[samantha_lynn]

Could you send me tech data from the AP? I'd like to check the running configuration on it to see if we can find the reason for the interfaces changing their behavior.

Here are some guides on how to get tech data, for reference depending on which HiveManager platform you are using:

HiveManager Classic-https://thehivecommunity.aerohive.com/s/article/How-to-download-tech-data-in-Classic 

HiveManager NG-https://thehivecommunity.aerohive.com/s/article/How-to-download-tech-data-in-HiveManager 

Device CLI-https://thehivecommunity.aerohive.com/s/article/Collecting-Tech-Data-via-CLI

This guide will walk you through how to determine which HiveManager you are using, for reference: https://thehivecommunity.aerohive.com/s/article/Which-HiveManager-Platform-am-I-using