Is there a way to defin what channels are used in "Dynamic Channel Switching"?

[tim_skagerberg1]

We have alot of device's that can only use cretin channels on 5ghz, it would be nice to be able to define what channels it can use so we can let the AP decide which channels to be use so it is automatic if an AP is upgraded/replaced or moved.

[AnonymousM]

Good deal. My way was/is about the only way to do it in the legacy HM platform. And yes, without good documentation that way can be hard to keep up with.

[tim_skagerberg1]

That did the trick, changing the channel back to audio did bring back the option to exclude channels.

Thank you!

Brian, your way works as well, the only problem i have with it is that it doesn't show in the GUI which channels are excluded. So if someone doesn't read our in house documentation they wont know.

[tim_skagerberg1]

I do have them set manually, i will toggle that and check it out and get back to you. Thanks!

[ashley_finch]

Tim, this option is available for both radios through the GUI. Do you have a channel manually set on the 5GHz? If so the exclude option disappears.

If not, could you provide a screenshot?