cancel
Showing results for 
Search instead for 
Did you mean: 

No RSSI measurements in the range between -50 and -80 dBm are available for AP1, AP3, AP5. Please try increasing the RSSI range for calibration in global settings for maps, or clear "Calibrate heat maps" to use predictive heat maps instead.

No RSSI measurements in the range between -50 and -80 dBm are available for AP1, AP3, AP5. Please try increasing the RSSI range for calibration in global settings for maps, or clear "Calibrate heat maps" to use predictive heat maps instead.

lchisholm
New Contributor
No RSSI measurements in the range between -50 and -80 dBm are available for AP1, AP3, AP5. Please try increasing the RSSI range for calibration in global settings for maps, or clear "Calibrate heat maps" to use predictive heat maps instead.
1 ACCEPTED SOLUTION

samantha_lynn
Esteemed Contributor III

If you open your Radio Profile, can you see what settings you have for the background scans? The APs would need to be able to complete background scans to report this information to the HiveManager, and if we have background scans set to not run when we have active clients on the network, then then could explain why we aren't see any results in your Maps when you check them.

View solution in original post

55 REPLIES 55

lchisholm
New Contributor

Does anyone know how to fix this so I can use predictive heatmaps for this location?

GTM-P2G8KFN