cancel
Showing results for 
Search instead for 
Did you mean: 

Port forwarding XR200P to

Port forwarding XR200P to

is_krem
New Contributor

Hello. I'm trying to configure homelab to allow inbound traffic on port 32400 to a PLEX server.

 

Internet > Bridge Modem > XR200P > SR2208P > PLEX

 

I am unable to get this to work. I first started without any firewall configuration and default user profile. I have now created a new user profile which is applied to all devices (confirmed by HiveManager monitor), but it is still not working. So I am wondering if there is anything I have forgotten, or any settings I also need to configure further?

 

Thanks in advanced.

5 REPLIES 5

AnonymousM
Valued Contributor II

You can push a Delta update from the GUI. This basically just applies the CLI commands to the AP without rebooting. Major adjustments to the configuration require a Complete update. If you push a Delta update and it fails, you likely need to push a Complete.

is_krem
New Contributor

Okay, so I reverted the user profile on Access Port on XR200P back to default-profile and now it seems to be working as intended.

is_krem
New Contributor

Nevermind, when I test the connection it fluctuates between working/not working.

is_krem
New Contributor

I managed to get it working after an unexpected reboot due to power. So now it's working at least.

 

Is there any CLI commands to do a "manual" refresh of configuration to avoid having to reboot?

GTM-P2G8KFN