ssid

[dana]

ssid

[samantha_lynn · Accepted solution]

Thanks for those details, depending on which HiveManager platform you are using, you'll want to use the following guide:

HiveManager (formerly NG)(cloud.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/PPSK-SSID-in-NG

HiveManager Classic (myhive.aerohive.com)- https://thehivecommunity.aerohive.com/s/article/PPSK-SSID-Set-Up

[dana]

Hi Sam,

I was successful deploying a network policy and connecting to those networks.

This is a minimal installation - I have one AP122 and want to use PPSK.

The number of users will be around 50 and about 10 of those may be connected at one time.

HiveManager seems overwhelming in respect to such a small installation.

Please direct me to a setup guide for this situation.

Best Regards,

Dana Schoonover

Marco Lane LLC

937 435-4110

[samantha_lynn]

Hi Dana, thanks for clarifying. You'll need to build a Network Policy (and SSIDs within the Network Policy) and then push that network policy out to your APs. If you can let me know what kind of SSID you want to build and what HiveManager platform you are using, I can direct you to a set up guide to help with the set up.

[dana]

Hi Sam,

Thanks for getting back to me.

I just installed an AP122 and see no broadcast of an SSID.

That's what my query is about.

Dana Schoonover
Marco Lane LLC
937 435-4110