show version management
System Mode: MLX
Chassis: MLXe 16-slot (Serial #: BFQ2546L00L, Part #: 40-1000360-05)
NI-X-HSF Switch Fabric Module 1 (Serial #: BEU0428L00E, Part #: 60-1001588-14)
FE 1: Type fe600, Version 1
FE 2: Type fe600, Version 1
FE 3: Type fe600, Version 1
Switch Fabric Module 1 Up Time is 2 days 13 hours 56 minutes 33 seconds
NI-X-HSF Switch Fabric Module 2 (Serial #: BEU0426L0BZ, Part #: 60-1001588-14)
FE 1: Type fe600, Version 1
FE 2: Type fe600, Version 1
FE 3: Type fe600, Version 1
Switch Fabric Module 2 Up Time is 2 days 13 hours 56 minutes 33 seconds
NI-X-HSF Switch Fabric Module 3 (Serial #: BEU0434L018, Part #: 60-1001588-14)
FE 1: Type fe600, Version 1
FE 2: Type fe600, Version 1
FE 3: Type fe600, Version 1
Switch Fabric Module 3 Up Time is 2 days 13 hours 56 minutes 33 seconds
NI-X-HSF Switch Fabric Module 4 (Serial #: BEU0316F08Z, Part #: 60-1001588-08)
FE 1: Type fe600, Version 1
FE 2: Type fe600, Version 1
FE 3: Type fe600, Version 1
Switch Fabric Module 4 Up Time is 2 days 13 hours 56 minutes 33 seconds
==========================================================================
SL M1: BR-MLX-MR2-M Management Module Active (Serial #: BVP0419L02Z, Part #: 60-1002374-07):
Boot : Version 5.9.0T165 Copyright (c) 1996-2015 Brocade Communications Systems, Inc.
Compiled on Mar 19 2015 at 03:16:46 labeled as xmprm05900
(521771 bytes) from boot flash
Monitor : Version 6.2.0T165 Copyright (c) 1996-2015 Brocade Communications Systems, Inc.
Compiled on Aug 17 2017 at 11:22:12 labeled as xmb06200
(546965 bytes) from code flash
IronWare : Version 6.2.0bT163 Copyright (c) 1996-2015 Brocade Communications Systems, Inc.
Compiled on Apr 4 2018 at 08:59:36 labeled as xmr06200b
(10676645 bytes) from Primary
Board ID : 00 MBRIDGE Revision : 37
1666 MHz Power PC processor 7448 (version 8004/0202) 166 MHz bus
512 KB Boot Flash (MX29LV040C), 128 MB Code Flash (MT28F256J3)
4096 MB DRAM INSTALLED
4096 MB DRAM ADDRESSABLE
Active Management uptime is 2 days 13 hours 56 minutes 33 seconds
######################################################
show module
Module Status Ports Starting MAC
M1 (upper):BR-MLX-MR2-M Management Module Active
M2 (lower):BR-MLX-MR2-X Management Module Standby(Reset State)
F1: NI-X-HSF Switch Fabric Module Active
F2: NI-X-HSF Switch Fabric Module Active
F3: NI-X-HSF Switch Fabric Module Active
F4: NI-X-HSF Switch Fabric Module Active
S1: NI-MLX-10Gx8-M 8-port 10GbE (M) Module CARD_STATE_UP 8 cc4e.2497.6900
S2: NI-MLX-10Gx8-M 8-port 10GbE (M) Module CARD_STATE_UP 8 cc4e.2497.6930
S3: NI-MLX-10Gx8-M 8-port 10GbE (M) Module CARD_STATE_UP 8 cc4e.2497.6960
S4: NI-MLX-10Gx8-M 8-port 10GbE (M) Module CARD_STATE_UP 8 cc4e.2497.6990
S5: Powered Off (By User)
S6:
S7:
S8:
S9: Powered Off (By User)
S10: Blocked for full height card in Slot 9
S11:
S12:
S13:
S14:
S15:
S16:
###############################################
show running-config | include system
system-max mac 131072
system-max vlan 1500
system-max ip-arp 65535
system-max ip-cache 256000
system-max ip-route 256000
system-max virtual-interface 1500
system-max ipv6-cache 65536
system-max ipv6-route 65536
system-max receive-cam 0
system-max ip-source-guard-cam 30000
system-max ipv6-receive-cam 4096
system-init tm-credit-size credit_1024b
#####################################################
Rconsole standby
Remote connection to standby established
Press CTRL-X to disconnect it
NetIron XMR/MLX Boot Monitor Version 6.2.0
Enter 'b' to stop at boot monitor
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 0)
received IPC_MSGTYPE_REBOOT_ACK from fid d020
received IPC_MSGTYPE_FILE_TX_START: status = 0, tx_id = 3, rec_id = 1, more = 1, tx_window_size = 20
src fname = monitor.sig, length = 256, checksum = 77b3, dst fname = monitor.sig, save_to_mem = 0, copy_to_boot = 0
Write to memory done.
download_write_to_flash: fp = 1, length 256
done.
MP Synchronization for monitor.sig is done
received IPC_MSGTYPE_FILE_TX_START: status = 0, tx_id = 4, rec_id = 1, more = 1, tx_window_size = 20
src fname = primary.sig, length = 256, checksum = 57c7, dst fname = primary.sig, save_to_mem = 0, copy_to_boot = 0
Write to memory done.
download_write_to_flash: fp = 1, length 256
done.
MP Synchronization for primary.sig is done
sys_ipc_active_boot_info: bp - board class: 0x84, chassis type 0xf0.
sys_ipc_active_boot_info: mp - board class: 0x81, chassis type 0x6b.
INFO: New 16-slot backplane is detected.
BOOT INFO: load image from primary copymy_slot = 34
rw_get_mac_and_arbitration_delay: peer is active, give up.
Total Sector = 4098528
Total size = 2098M bytes
Storage Card SLOT INFO:SILICONSYSTEMS INC 2GB-3625
Slot 1 - File System init done
Total Sector = 4098528
Total size = 2098M bytes
Storage Card SLOT INFO:SILICONSYSTEMS INC 2GB-3625
Slot 2 - File System init done
load_monitor_config: BP board_class=0x84, chassis_type=0xf0
load_monitor_config: MP board_class=0x81, chassis_type=0x6b
INFO: New 16-slot backplane is detected.
keep_alive_enabled = 00000001
hb_failure_reset = 00000001
fsm_no_timeout = 00000000
scp_debug = 00000000
scp_debug_lacp = 00000000
scp_debug_port = 1(0)
scp_debug_port = 1(0)
Chassis and Module type mismatch check enabled (g_chassis_type_check_enabled = 1)
3: RW_MBRIDGE_STATUS_REG = 07ff3fff
g_max_slave_slot = 16
my_slot = 34
active_mp_slot = 33, standby_mp_slot = 34
Hit any key to skip IPC handshake with Active Management...
Standby Management Module
#####################################################
About https://extremeportal.force.com/ExtrArticleDetail?an=000063714
I believe I ran into this but I just did an "erase" (deleted all files from secondary MP flash) and secondary MP flashed successfully into... well, MR2-X.
