Hello all. How can i adjust tcp mss on gre tunnel with MLX?
In documentation states:
Modifying the TCP MSS value based on the GRE tunnel MTU configuration
For example, on ethernet interface 1/1 the TCP MSS value is configured to 1400 bytes. The ethernet interface 1/1 is a tunnel source for the GRE tunnel 100. If you configure the GRE tunnel MTU value to 700 bytes on ethernet interface 1/1, the software internally modifies the TCP MSS value to 660 bytes.
So as i understand if i need mss 1360 i should just adjust mtu on a gre interface to 1400 and mss will be changed too.
interface tunnel 1
tunnel mtu 1400
Am i right?
Thanks in advance.
