dhcpd VDX 6740 configuration?

[mbze430]

Reading through the CLI manual from 7.4.0, there is a dhcpd server since 7.1.0

how does one configure the scope for the dhcpd  I couldn't find anything how the config file should look.  Or it just uses linux based dhcpd.conf like format?

[Michael_Morey · Accepted solution]

The DHCP service on the VDX is only for DHCP Relay, it does not actually manage/serve out IP addresses, it is just a middle-man.  It will listen for a DHCP request, forward the request to the configured server, receive the response and forward the assigned IP to the requester.  This is all configurable in NOS-CLI, I would not recommend messing around in the Linux shell.