cancel
Showing results for 
Search instead for 
Did you mean: 

Security violation message keeps occurring.

Security violation message keeps occurring.

BS_Choi
New Contributor

Hi, everyone

Security violation messages continue to occur on the vdx6940

What's unusual is that the message continues to occur with the loopback IP address.

May I know the cause of this symptom?

 

 

====================================================================

 

2021/07/14-13:46:41 , [SEC-1193], 11972, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:46:45 , [SEC-1193], 11973, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:46:48 , [SEC-1193], 11974, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:46:51 , [SEC-1193], 11975, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:46:54 , [SEC-1193], 11976, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:46:58 , [SEC-1193], 11977, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:47:01 , [SEC-1193], 11978, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:47:03 , [SEC-1193], 11979, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
2021/07/14-13:47:07 , [SEC-1193], 11980, SW/0 | Active, INFO, BB_2, Security violation: Login failure attempt via TELNET/SSH/RSH. IP Addr: 127.0.0.1.
 

1 ACCEPTED SOLUTION

joergkost
Contributor II

Looks something is out of sync, do you have support on that box? 

View solution in original post

2 REPLIES 2

BS_Choi
New Contributor

I requested support from GTAC

joergkost
Contributor II

Looks something is out of sync, do you have support on that box? 

GTM-P2G8KFN