New Documentation Published February 2nd-15th!

[SamPirok]

Our support teams published 109 new articles in the last two weeks! Check out the new titles below!

All

XIQC - Can location based VLANs be dynamically assigned to SSIDs like in XIQ Cloud? 

SA-2024-035 - Linux kernel netfilter use-after-free (CVE-2024-1086) 

SA-2024-099 - OpenSSL SSL TLS Renegotiation DoS (CVE-2011-1473)

Campus Fabric Articles

How to change the cost of OSPF for a vlan interface in VOSS 

VOSS : Unable to reach a ESXi host management IP connected on a SMLT ERS stack 

Connectivity issue with certain IPs when ARP entries are learnt on "TX-NNI" in the ARP table 

VOSS VLAN-based rate limiting 

SFP's Going Up and Down 

How to configure password age in enhanced secure mode? 

How to check if UDP checksum is enabled or disabled? 

ERS3600 Client communicates without a MAC being learned on the port 

DHCP Not Working with a Particular VLAN on the Universal 5420 Running VOSS/Fabric Engine Software 

5720 Fabric Engine: Port link state active when port disabled and latency issues with 100Mbps ports 

Voss 8.10.6.0: Stops forwarding MC traffic to igmp static ports after igmp join/leave packet from cl... 

VOSS: ISIS Auth in ZTP+ in a ring/ chain topology yields Inconsistent Behavior 

Clients Unable to Obtain IP from DHCP, Where they can not Connect to the network on a VSP 7400 Switc... 

How To Disable Screen Logging on the Console Port

Data Center Articles

MLX LP Fails to Boot after Upgrade 

Error MCT Peer failed to come up after upgrade to 20.6.2b code 

MLX-16 -Ports of LP1 & LP2 are stuck in disable state 

How to check if a port has a device connect that has been assigned an autosense profile 

LSP to an RSVP neighbour fails with "CSPF fails: TED not complete" 

EFA didn't upgrade completely but showing on the new version 

BGP Routes Preferring /24 Null Routes Over More Specific /26 and /27 Routes on MLX 

Broadcast DHCP packets received on a CCEP interface were incorrectly looping between MCT peers over ...

EXOS Articles

What does the follow error indicate "<Erro:vlan.AddIPAddrFail> Failed to add IP addr x.x.x.x/x.x.x.x... 

25G, 40G or 100G port is not coming up after upgrading to EXOS 32.7.1.9 

Is there a way to monitor the average CPU usage of an EXOS switch in XIQ SE? 

Supported SFP (10405) is being showed as unsupported in x690 

Local switch configuration is out of sync after turning off STP 

New Telnet sessions cannot be established during EXOS installation 

High CPU due to fragmentation 

"Command parse token stack overflow" while using tab in the command "show iproute ipv4" 

Unfeasible BGP Routes 

Does ExtremeCloud IQ (XIQ) allow you to configure the built in DHCP Server on EXOS? 

A slot in a 5520 stack is rebooting randomly due to the xmld process crashing 

EXOS not onboarding in IA-GCP 

Can you run both BFD and BGP Graceful Restart Simultaneously?

General Articles

Is it possible to save the configuration of current ISW switch as a template and load it to other IS...

ISW down in XIQ-SE

IdentiFi

Singel SSID with multi VLANs - Which data may be seen by the client? 

What causes duplicate SSID to appear with number behind the SSID name 

XIQC | Increase transmit power on Extreme acccess point

Legacy Articles

AP5020 becomes unresponsive 

[XIQC] error "Sorry, you have been blocked Your are unable to access export.highcharts.com" when try...

SD-WAN Articles

Physical interface is not recognized by the SDWAN appliance 

Appliances not completely displayed on "Onboard" tab.

Universal Articles

CPU running at 100% utilization on a Fabric Engine 5420 

Is CFD-11909 Also Resolved In VOSS/Fabric Engine 9.1.0.0 Release 

WiNG Articles

AP3000 AP5010 shows offloaded tx radio NAR q full 

SNMPv3 trap not working on XIQ-SE 

Unable to monitor APs via SNMP application after the application was moved to a different subnet 

Unable to set nsight URL via NOVA UI 

ADSP web page takes long time to load 

Failed to upgrade rf-domain with staggered-reboot flag 

AP4000-1 and other AP without bluetooth module shown with bluetooth icon on ADSP

XIQ Articles

Why API call tx/rx errors return negative value
New SSID not being broadcasted [XIQ]
Throughput statistics on a dashboard are not reliable
Admin user cannot see all option under global setting on XIQ
Config cannot be pushed to AP and AP is showing the number of wired users who are connected behind t...
Guest Essentials - Nothing happens when clicking the "Accept and Connect" button
XIQ APs not using DFS channel
Guest Essentials - "Onboarding policy is not available" error message on wireless devices
Access points not reporting wired interfaces correctly in XIQ
AP5020 Displays Incorrect Radio Information in Devices List View in XIQ Web GUI
XCO3.6.0 Inventory page issue where pagination skipping SLX9240 IPV4 device from GUI location page
Radius Attribute is missing in User Profile Assignment Rules on SSID
XIQ APs May Remove Fabric Attach Configuration on Reboot
HOW TO ALLOW CLIENTS TO RECEIVE IPV6 IN XIQ-C
CPU Utilization false alert
Where can I find the Power Requirement details for USB and/or PSE on the AP5010
Application name in top N users chart
How can I enable the USB port on an AP5010 when using 802.3at power
PPSK - Creating Expired PPSK password gives error: The user cannot be saved because a unique value i...
When trying to create new Site in XIQ Planning, receiving error that the site name Cannot be saved b...
[XIQ] SSID using NAC doesn't work after disabled 2.4Ghz
"Unable to access data" error when trying to remove device(AP/Switch) in XIQ
‘warning’ in the ‘Update Status’ column of the AP list
"Unknown error has occurred" while filtering device list in XIQ
What to expect when Alert Policy have both Global Policy and Site Policies configured?
Unable to change APs back to Managed state after license expiration - error "Unable to add device se...
What are the Device Connected and Device Disconnected options` correspond to, in the XIQ alert polic...
XIQ Controller E2122 error: Failed to calculate floor maps
VGVA vulnerabilities, future fixes and end of software maintenance support
Particular client can't connect to AP
Is there a way to confirm that the external antenna leads are the connected to the certain ports?
XIQ - How to assign an SSID to one AP
"The VPN Gateway cannot be deleted as it is configured in VPN Service" when trying to remove the VGV...
XIQ - Experiencing dead zones in areas with scanners on the 2.4GHz radio
(XIQ) AP rebooting / AP stuck in boot loop / AP keeps rebooting
Exceeded available licenses even though enough are available
[UCP] L2 interface configuration can not be added due to "Host address for the IP cannot be 0"
How to disable AirDefense Essentials in ExtremeCloud IQ
How to enable Data / Time Limit on user profile
"size must be between 0 and 8" error when saving SSID configuration.
Why does XIQ authentication logs show multiple of same failure events from same client MAC
User-group object cannot be deleted
[XIQ] Changed configuration is not applied after delta update.
Users unable to register PPSK account via captive web portal
Can PPSK SSID configured with remote server to host Users Database?
Gaps or Missing Data in Client Reporting
L2VPN clients authenticated with Open when SSID is WPA3-802.1X
XIQ API error : PERMISSION_DENIED: Access denied for 'Connect' customer.
Is it possible to use SSO (Entra) with multiple tenants?
Users are being disconnected on GRE tunnel with XR600 router as GRE end point
AP Stops Using Template after Setting Hostname
Users are not able to register via Captive Web Portal with cloud user-group
Using the XIQ-C GUI to Create API Queries

If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.