a week ago
Our support teams published 42 new articles last week! Check out the new titles below!
All
Why are the Fabric ISL redundant links not available?
Campus Fabric Articles
ERS 4900/5900: Unable to Add SNMPv3 User
VOSS/FE: FA Management VLAN not showing in MLT output
Only default RAM value can be allocated to a VM on IAH switch.
Error "Operation not allowed" When Enabling SLPP-Guard On Port
VOSS: How to Change Default Spanning Tree Mode(MSTP) to RSTP
VOSS: How to Make one Switch acts as Root Bridge and the other Switch the backup Root Bridge in RSTP...
VOSS: No software commands available
Multicast lite attribute is ignored when sent via RADIUS VSA in Fabric Engine SW 9.0.4.0
How to enable DHCPv6 Guard on VOSS devices?
VOSS: "Getting ACLI WARNING Blocked unauthorized ACLI access for user rwa from console port" After E...
Data Center Articles
Power Supplies Issue on MLXe chassis
What EFA fabric parameters can be updated
EXOS Articles
Switch Engine : High latency and intermittent packet drop to devices connected in management VLAN.
Netlogin doesn't work on Tenant VLAN when VLAN was added and removed manually
Multicast Traffic with TTL of 1 is Flooded on 5520 and 7720 Platforms
7520 Stack Switch Keep continues reboot and stack is not built
General Articles
How to renumber switch in a 220 series stacking?
Legacy Articles
Can older XCA appliance with firmware 4.xx OR XCC running 5.xx, be upgraded to the latest XIQC versi...
How to verify which UNII-2 and UNII-3 channels are available for use in a specific country or on a s...
Unable to activate OWE Transition Auto Provisioning on 6 GHz Radio
Where to find new XIQC (controller) installation, product documentation and user guides (formerly kn...
SD-WAN Articles
Why is my backhauling traffic not working when a tunnel is down?
Universal Articles
Packets that should be denied by an ACL applied to the egress direction of a VLAN are apparently all...
VOSS/Fabric Engine - multicast data traffic handled on control plane despite no MC receiver/sender o...
XIQ Articles
Why cannot I select/see some missing UNII-2 and UNII-3 channels` available for my access point model...
How to add client alias manual
Can you disable 802.11v in XIQ-Controller?
XIQ - How to collect logs from randomly and unexpectedly rebooting APs
1 device (s) were not changed to MANAGED; Not enough subscriptions to satisfy the requirement.
How to find ova Image installation file for XIQC (Controller) and release notes (XIQC formerly known...
XIQ-C// Upgrade failure w/ error "INFO: rcu_sched self-detected stall on CPU; blocking rcu_node stru...
AP using incorrect Default Gateway IP on WingOS but is correct on HiveOS
How to install and deploy the latest XIQC (controller) VM machine via OVA image file?
How to create/setup an OPEN ssid with option to self register using XIQ cloud Service(no radius requ...
Error code 502 when logging into Extreme Platform ONE (EP1) with XIQ External account
Explain new event and metric trigger type rules for XIQ Alert Policy feature such as Immediate, Defe...
Captive portal page doesn't pop when using XIQ-C and XIQ GuestEssentials
CWP Self-Registration Page does Not Populate using Apple Devices
Captive web portal for guest network is not showing up
How is the Radius fail over behavior changed from 10.7.2 to 10.7.3 IQ engine version.
Extreme Cloud IQ Pilot - Where to find 2.4ghz and 5ghz interface radio Usage
If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.
