New Documentation Published July 16th-22nd!

[SamPirok]

Our support teams published 54 new articles last week! Check out the new titles below!

Campus Fabric Articles

Several VRRP vlans never entered master state after upgraded and restarting 

How To Change Username Password In Enhanced-Secure Mode 

VSP /Universal: Client MAC Address Request for Authentication is Received by NAC /Radius From Unexpe... 

How To Force Only HTTPS for Web-Server/GUI/EDM Access To Switch 

Unable To Set RADIUS Server Key When Configuring RADIUS 

VSP-7432CQ spontaneous reboot 

Avaya VoIP phone not getting voice Vlan on new VOSS 5420 switches 

VOSS: How to debug SNMP? 

Link doesn't come UP after 25Gb SFP inserted and replaced with 10Gb SFP in a 10Gb port. 

Why does Radius Reachability Check Fail but Radius Works?

Data Center Articles

"Could not get TPVM IP" seen after doing TPVM upgrade 

Multicast routing configuration review and troubleshooting on ICX6610 and MLXe16 

LDP session marked "Nonexistent" 

IPv6 Peers continue to flap 

Brocade VDX6940-36Q - switch is online but shows no port status and shows unknown in vcs cluster 

What are the supported servicetype for SLX9240 for EVPN mac-vrf-instances 

Does the MLXe support IPv6 with the following management functions? 

Not receiving arp replies to a specific host in SLX 

System reloaded unexpectedly after running command 'show bridge-domain' 

Bridge-Domain VPLS MAC addresses not getting leant when hardware counter-profile-6 is configured

EXOS Articles

An X435 sends extremeOverheat traps despite device temperature being at or below the high temperatur... 

"Upgrade failed, timer expired when download image report" message seen when upgrading SummitStack 

Switch Operating System Selection for Universal Hardware 

Resource Limit error 

What is the hardware-assist ELRP? 

Legacy Articles

Updated HyperV server to Data Center 2022 and lost communication to XIQ-C controller 

XIQC - showing incorrect client stats a number that fills the whole screen 

[XIQ-C] "/usr/bin/redis-hist" occupy 47% of memory 

Is it possible to build a Mesh Bridge in XCC/XIQ-C that egresses traffic via Eth0 and not GE2 on the... 

Is there documentation covering how BLE information gathered by XCC/XIQ-C can be referenced via API? 

How to backup and restore in XIQ and validate it worked ? or Why the Restore shows no changes made i...

SD-WAN Articles

The "Apache Directory Server" service does not start on my Ipanema Essentials platform 

Why my appliance can't synchronize the date with the Orchestrator? 

Microsoft Teams codec recognition on ExtremeCloud SD-WAN 

Microsoft Teams codec recognition on Ipanema Essentials and Ipanema SD-WAN 

How to reboot an appliance on User Interface 23.x? 

What are the hardware prerequisites to install SALSA 9.4? 

Universal Articles

How To Disable Telnet on VOSS 

WiNG Articles

What XIQ APs support SES Imagotag? 

WiNG - Is it possible to validate emails when using self registration captive portal? 

AP510i continuous rim crashed after upgrading from WiNG 7.5.X to WiNG 7.9.0.1 

WiNG AP410C WLAN setting return error message RRM is not supported 

How to find a serial number of a WiNG device via the legacy GUI ( wing manager)? 

How to use different VLANs for same WLAN/SSID at different RF-Domains 

XIQ Articles
Hostname isn't updated in heat map for offline devices on XIQ 

Why clients can connect to open SSID after disable "Inter-station Traffic" ? 

AP generated Radius server is unreachable, but there is no issue towards wireless client 802.1x auth... 

XIQ | WiNG AP310 VC Deployment and Onboarding Issues Observed 

How to find DFS events in ExtremeCloud IQ 

XIQ - Clients getting 169 addresses but Access Points are getting correct IP addresses 

XIQ | Devices showing 'Action Needed' prompt instead of automatically connecting to 802.1X network 

Config push fails after importing APs via CSV file 

XIQ - Frequent CAPWAP Connection Lost is occurring due to a bug of Palo Alto Firewall. 

SMS for guest SSID is being sent with delay or not being sent 

If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.