cancel
Showing results for 
Search instead for 
Did you mean: 

Summit200-24 - Version 6.2e.2 upgrade

Summit200-24 - Version 6.2e.2 upgrade

Eh_Mohsenpouria
New Contributor
hi, i want to upgrade my Summit200-24 firmaware.
where and how i can start ? i need some manuals and firmware files.
plz help. tnx

8 REPLIES 8

Eh_Mohsenpouria
New Contributor
Summit200-24 - Version 6.2e.2 (Build 16) by Release_Master_ABU Thu 06/26/2003 16:33:54
Summit200-48 - Version 7.1e.2 (Build 1) by Release_Master Tue 07/13/2004 15:15:31
Summit200-24 - Version 7.1e.2 (Build 1) by Release_Master Tue 07/13/2004 15:15:31
Summit48si - Version 6.2.2 (Build 68) by Release_Master 01/15/03 16:58:48
Summit200-24 - Version 7.8e.3 (Build 5) by Release_Master 03/15/10 11:58:06
Summit1i - Version 7.2.0 (Build 25) by Release_Master 03/23/04 15:55:45

--------------------------------------------------------------
Summit200-24 - Version 7.1e.2 (Build 1) by Release_Master Tue 07/13/2004 15:15:31
BootROM : 1.5

Image : Extremeware Version 6.2.2 (Build 68) by Release_Master 01/15/03 16:58:48
BootROM : 7.6

Image : Extremeware Version 7.8e.3.5 [non-ssh] by Release_Master on 03/15/10 11:58:06
BootROM : 5.1


Image : Extremeware Version 6.2e.2 (Build 16) by Release_Master_ABU Thu 06/26/2003 16:33:54
BootROM : 1.5

Image : Extremeware Version 7.2.0 (Build 25) [non-ssh] by Release_Master on 03/23/04 15:55:45
BootROM : 8.1

683eea0c57a9403994ac8ee788a85296_RackMultipart20150822-32668-17pk9fc-ver_inline.png



Drew_C
Valued Contributor III
Can you share the output of
code:
show version
? I'd like to make sure we're talking about the same set of equipment and files. There may be something else I need to send.

EtherMAN
Contributor III
If I recall there was a bundled image/bootrom if the S200 was running older boot rom... It rewrites memory allocation so it is a good idea to have a current back up ready just incase.. On restart you will see a lot of errors in the file as it re-works the configuration and fires up under newer image and bootrom.

I just logged into Esupport and you can get v784b1.Wxtr This is the last wrapper image that will upgrade a Summit 200 older than 7.3 to latest code and do an auto upgrade of the bootroom to 5.1... You should be able to get this if you have any support contract... The bootroom is there and the release notes... I guess if you can't get to them Drew will need to bundle them up for you.
GTM-P2G8KFN