cancel
Showing results for 
Search instead for 
Did you mean: 

What ports need opened on firewall to allow Ridgeline through to backup devices (from switch to server)?

What ports need opened on firewall to allow Ridgeline through to backup devices (from switch to server)?

Jimmy2
New Contributor
The port numbers below have not changed for the install. What range of port numbers do I need to allow through the windows firewall for backups to occur?

#location: jboss/server/ridgeline/deploy/sybase-ds.xml
database.port=10553
#
# the following 2 ports can be changed by the client admin panel
trap.receiver.port=10550
syslog.prot=514
#
# location: freeradius/etc/raddb/radiusd.conf
radius.port=10559
#
# location: jboss/server/ridgeline/conf/bindingservice.beans/META-INF/bindings-jboss-beans.xml
jboss.port.1=10560
jboss.port.2=10561
jboss.port.3=10562
jboss.port.4=10563
jboss.port.5=10564
jboss.port.6=10565
jboss.port.7=10566
jboss.port.8=10567
jboss.port.9=10569
jboss.port.10=10570
jboss.port.11=10571
#
#location: jboss/bin/serverStart.lax
jboss.remoting.port=10555
epicenter.web.port=8080
#
# locations:
# jboss/server/deploy/jbossweb.sar/server.xml
# jboss/server/ridgeline/deploy/epicenter.ear/xos.war/WEB-INF/wsdl/event.wsdl
# jboss/server/ridgeline/deploy/epicenter.ear/nms.war/WEB-INF/wsdl/nms.wsdl
https.port=8443
#
# Ridgeline Agent (only required if MS VMM agent is used)
# location:
# jboss/server.conf/EpicenterManagement.properties
# RidgelineServer.exe.conf
agent.port=10556
#
# TCP port for client to connect to server in NAT environment, only used in NAT environment.
tcp.port=56983

1 REPLY 1

Ty_Izzet
Extreme Employee
Jimmy, port 8080, 8443, 10550, 10553, 10555, 10556, 10559 should remain open. If you are backing up or restoring configuration, please confirm whether you can telnet/ssh into the switch from Ridgeline to ensure the backup/restore script can be executed.
GTM-P2G8KFN