Getting error when try to add Extreme-Dynamic-Client-Assignments

[Klovi456]

Hello,

I'm getting errors when I paste and save the following into a RADIUS attribute to send back to a VOSS switch when I configure it in Extreme Control.

Edited the switch settings and created a new RADIUS attribute to send called Extreme VOSS - Platform VLAN Creation.

When I add the below and click save I get errors.

Extreme-Dynamic-Client-Assignments=create=vlan, pv=%VLAN_ID%,vni=%CUSTOM1%, ev=%VLAN_EGRESS%, vn=%VLAN_NAME%, vnin=%CUSTOM2%
%ORG1_RADIUS_ATTRS_LIST%
%ORG2_RADIUS_ATTRS_LIST%
Passport-Accept-Priority=%MGMT_SERV_TYPE%

Error

The following problem(s) were found in the attributes:

Attribute in Extreme-Dynamic-Client-Assignments=create=vlan, pv=%VLAN_ID%,vni=%CUSTOM1%, ev=%VLAN_EGRESS%, vn=%VLAN_NAME%, vnin=%CUSTOM2% is invalid.
Attribute in Passport-Accept-Priority=%MGMT_SERV_TYPE% is invalid.

Any ideas why this is happening, I see there is VSA called Extreme-Dynamic-Client-Assignments in the release of Extreme Control 24.10.13.5.

Thanks,

[Robert_Haynes]

In fact this question is an exact duplicate text for text for https://community.extremenetworks.com/t5/extremecontrol/getting-error-when-try-to-add-extreme-dynami....

[Robert_Haynes]

I think this was asked and answered on another thread recently.

The obvious is Passport-Accept-Priority -> Passport-Access-Priority. You have a mistype for the attribute name.

The other one is not so obvious. However I would imagine you can correct it by selecting from the pulldown the same VSA and then pasting in the value for that VSA.

Where are you copying this data from? What source? Perhaps there is a formatting error, null character, etc you are copying from that source that triggers this that isn't translated here when you copy/paste the same to the forum posting.