cancel
Showing results for 
Search instead for 
Did you mean: 

I am receiving some alerts stating that Switch UP/Down in netsight , getting the alerts from the switch. But I am able to ping the switch and switch is up so what we need to do in this case please suggest me.

I am receiving some alerts stating that Switch UP/Down in netsight , getting the alerts from the switch. But I am able to ping the switch and switch is up so what we need to do in this case please suggest me.

ompal_singh
New Contributor II

I am  receiving some alerts stating that Switch UP/Down in netsight , getting the alerts from the  switch. But I am able to ping  the switch  and switch is up  so what we need to do in this case please suggest me.

1 REPLY 1

Zdeněk_Pala
Extreme Employee

The Extreme Management use SNMP. Check if the SNMP goes through. the fact you can ping the device does not mean the SNMP is working properly. I suggest checking CPU and memory resources. If the Extreme Management is underprovisioned then very often there are false alarms.

Regards Zdeněk Pala
GTM-P2G8KFN