At the moment my NAC doesnt recognize some of our iPhones. Doesnt seem to be model related because the error occours whith SE, 6 and 7 and 10 models.
iOS Versions are 12.0; 12.1
If i run a configuration evaluation on the NAC on the devices the rule that now failes on that devices says:
" FAILED: The Operating System Name of: unknown did not match any values defined for this inclusive criteria. "
There should be:
" PASSED: The Operating System Name of: iphone/ipad/ipod/watch/atv matches the inclusive pattern: .*ipod.*. "
Full rule detailed reasons:
" PASSED: The Authentication Type of: 802.1X (EAP-TLS) is equal to or derived from the inclusive criteria: AUTH_8021X_EAP_TLS.
PASSED: The Device Type of: MAC Address: 98:10:E8:xx:xx:xx, IP Address: x.x.x.x, Host Name: null passes the any criteria evaluation.
PASSED: The User Name of: Rxxxxxxxr passes the any criteria evaluation.
PASSED: The Switch IP of 172.x.x.x, SSID: TQ-Mobile, AP Name: wl-ap-02, AP MAC: 20-B3-99-xx-xx-xx, AP Serial: 1349xxxxxxxxxxxx and AP Zone or Group: null and AP Location: null did match this inclusive criteria.
PASSED: The Time of: Donnerstag, 11. Oktober 2018 14:29 Uhr MESZ passes the any criteria evaluation.
FAILED: The Operating System Name of: unknown did not match any values defined for this inclusive criteria.
I have absolutely no clue why Operarting System Name is listed as unknown now.
I dont know what or where the NAC gets that Information from. Via DHCP fingerprinting?
I upgraded NAC/Netsight to the latest available version in 7.x (188.8.131.52).
WifI controller also hat the latest 9.21.20.001.
Still the same error.
" FAILED: The Operating System Name of: unknown did not match any values defined for this inclusive criteria."
Has something on the device fingerprint changed in Apples iOS 12.x maybe?
Are Apple iOS 12.x devices recognized by 8.x firmware of NAC/NetSight?
the problem wasn't related to iOS at all we found out.
One of the network team colleagues made a change on the dhcp relays and then one dhcp relays was misconfigured and did not properly relay the dhcp packages.
thx@all for your help