cancel
Showing results for 
Search instead for 
Did you mean: 

NetSight - Tree View - Data Display Format - Group Delimiter

NetSight - Tree View - Data Display Format - Group Delimiter

Fernando_CALVEL
New Contributor
In NetSight Console Option we can configure a character as an automatic group delimiter on the tree view.
So, in this way, when you access devices tree view --> Location... groups & sub-groups are made according with this "delimiter character"

However, on OneView... this character is not taken into account.

Anyone knows how we could get the same subdivision on "devices tree" showed at OneView?

Thanks a lot in advance.
Fernando.
6 REPLIES 6

Fernando_CALVEL
New Contributor
Yes... because in your example character is the default one "/"
However.... we have modified on Console View to "-", and it works perfect within the console view (subgroups split). However, this "character" is not taken into account for OneView

NetSight Console Screenshot

3b76d3e481cc4a51a60917efc2af03e4_RackMultipart20151023-8107-1slakys-NetSight-Console_inline.png



OneView Screenshot

Mike_Thomas
Extreme Employee
Fernando, can you provide a screen capture similar to the below? This is working here. The location Column will keep the delimiter in there regardless, as in console.

9d99e6349b5b446399c42d34ccee362a_13026-dwb3uk_inline.png


GTM-P2G8KFN