This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

trap logs alone not appearing inbetween in netsight version 6.1

trap logs alone not appearing inbetween in netsight version 6.1

Degalesan
New Contributor

‎08-01-2017 04:31 AM

trap logs alone not appearing inbetween in netsight version 6.1..console logs and syslogs are appearing
0 Kudos
5 REPLIES 5

BradP
Extreme Employee

‎08-01-2017 11:25 AM

While testing this, if you're using XOS, use the "create snmp trap" command to simulate a trap being sent from the switch.
0 Kudos

Karthik_Mohando
Extreme Employee

‎08-01-2017 07:35 AM

I would start looking in to the network for any link specific issue like any CRC errors and congestion in the port where the Netsight server is connected to.


In case if it is sure that the issue is inclined only towards traps then I would recommend to take a TCPDUMP in Netsight while the traps are sent by the switch and that can give a fair idea if traps are received to the server or not.

Once it is confirmed that the trap packet is seen in TCPDUMP and not in the Netsight console trap section, please gather "show support" and open up a GTAC case for further investigation.
0 Kudos

Degalesan
New Contributor

‎08-01-2017 05:14 AM

yes, your understanding is correct .it is for all the switches monitored by that Netsight.SMNP version is V1 in the switches as our IA software support only V1.

0 Kudos
GTM-P2G8KFN