cancel
Showing results for 
Search instead for 
Did you mean: 

v8 capacity planning

v8 capacity planning

Richard_Applebe
New Contributor II
A feature that we used quite a bit in NetSight was Capacity Planning which could be found on the Tools menu in Inventory Manager. With the deprecation of the Inventory Manager java app, have we lost this functionality?
1 ACCEPTED SOLUTION

Dorian_Perry
Extreme Employee
Hi All,

Capacity Planning can be found on the Network Tab under Dashboard>Inventory>"Capacity Planning"

Full instructions here:
https://emc.extremenetworks.com/content/oneview/docs/network/docs/l_ov_network.html#dashboard

View solution in original post

9 REPLIES 9

balditguy
New Contributor
Thanks Dorian, i've seen that, thats why i said 'basically non-existent'

The most i can get out of it is a red circle with no collection information, as others have stated. Clicking into the circle just gives me a list of inventory.

I'm not looking for a summary, i need a list of specific ports that have not been active for 'x' days

Steve_Ballantyn
Contributor
So for capacity planning to work port statistics must be collected for all interfaces?


I am a little unclear on that myself. I have enabled statistic collection for most of my switches (I chosed "Historical") but when I run this report in XMC it comes up with a big red circle of "Not Collected" ports. 

Meg_Low
New Contributor
Thanks Dorian,

So for capacity planning to work port statistics must be collected for all interfaces? Just checking since this wasn't necessary when Inventory Manager was around.

Dorian_Perry
Extreme Employee
Hi All,

Capacity Planning can be found on the Network Tab under Dashboard>Inventory>"Capacity Planning"

Full instructions here:
https://emc.extremenetworks.com/content/oneview/docs/network/docs/l_ov_network.html#dashboard
GTM-P2G8KFN