cancel
Showing results for 
Search instead for 
Did you mean: 

XMC search for devices with specific VLANs

XMC search for devices with specific VLANs

MichaelM1
New Contributor II

Is there a way inside XMC to search or run a report for all the switches in my environment that have a specific VLAN ID programmed in them?

Ex. Display all switches that have vlan 110

1 ACCEPTED SOLUTION

Ludovico_Steven
Extreme Employee
As attachment now.

View solution in original post

10 REPLIES 10

bar
Contributor
@Ludovico Stevens
that's great, but it doesn't show which other switches have the ISID configured like the
show isis spbm i-sid all
command​

Ludovico_Steven
Extreme Employee
show ip ipvpn

bar
Contributor
@Ludovico Stevens
Particularly useful for the L3 VSNs as I have yet to find an equivalent of the command:
show isis spbm i-sid all
which only shows the L2 VSNs.

Unless you are aware of one?​

Ludovico_Steven
Extreme Employee
So Fabric Manager is good for locating fabric services, so yes VLANs which are L2VSNs (= a VLAN with an I-SID assigned) and VRFs which are L3VSNs ( = a VRF with an I-SID assigned).
Whereas the base XIQ-SE maps will locate any VLAN, even VLANs that have no I-SID assigned.
GTM-P2G8KFN