Aerohive AP250 and VOIP Phone

[rkowals]

Can I attach an IP phone to ETH1 on an AP250 so I can connect to our phone system, so the AP will be acting as a bridge.

[rkowals]

I updated the AP250 template for ETH1 as Access Port, native vlan 1, allowed All.  Phone is still in a discovery stage for DHCP

[SamPirok]

Sorry, I believe Access Port is what it’s called in the GUI, it should be the same. 

[rkowals]

The phone is POE, but I’m using a POE Injector.  Bridge Mode on the Port Type isn’t available, I have looked on the Common Object and it isn’t in there as well.

[SamPirok]

As long as the IP phone doesn’t need PoE, you should be able to set the port to bridge access mode to do this. Just as a note, the AP250 will need to be getting PoE+ level power to have the use of its ETH1 port.