Extremecloud IQ multiple APs with CSV file and turning on DHCP?

[JonC]

Hey everyone!  When I load multiple APs using an CSV file it sets all the APs to static, is this by default?  I then have to go into each ap and turn the dhcp on.  Is there a way to turn the DHCP on for all the APs I load at once so I don't have to open each up individually?  I would think the DHCP would be the default setting. 

thanks! 

[Emre_Kurtman · Accepted solution]

Hi Jon,

You need to remove all the unused fields from the csv format so that they do not apply. If you don't want to apply static IP addresses to the APs, you should remove "StaticIPAddress" column from the csv template.