- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-20-2021 04:50 PM
It seems that (for a reason that is unclear to me) Schedule for SSID is missing from Connect.
Surely that is not “Enterprise only” specific , so would be nice to have it included.
Is there anything that stops me doing the schedule by few lines directly connected to the APs?
Ofcourse that needs to be done after each update from GUI (because it gets removed), but with few APs (in home use) it is not really an issue.
I think that same applies to Optimizing Radio Usage / Band Steering
That section is not locked, it simply does not exists at all!
Can anybody confirm above?
Thanks
sebus
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-20-2021 10:14 PM
Hello Sebus,
You are right, neither SSID schedules nor band/client steering is available under Connect.
However (in my opinion), the decission if a feature is available or not is not based on whether they are useful for corporate or private use, but rather the product differentiation is made based on basic (necessary) and advanced features.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-22-2021 07:26 PM
Sure, then I re-run them again (not that I make changes to the config on daily basis - especially in home environment, once set & working, leave it alone)
Copy/paste in Putty works great
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-22-2021 01:18 PM
You can technically enable some features via the CLI that aren’t available in Connect, but each time you push an update out to the APs, those features will be disabled again.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-20-2021 10:23 PM
But using CLI one can get the feature “back” (even if it is with way less convenience)
So it is kind of pointless to disable it in GUI
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
02-20-2021 10:14 PM
Hello Sebus,
You are right, neither SSID schedules nor band/client steering is available under Connect.
However (in my opinion), the decission if a feature is available or not is not based on whether they are useful for corporate or private use, but rather the product differentiation is made based on basic (necessary) and advanced features.
