Manually upgrdae firmware for Aerohive AP130

[ej]

Hello,

I have a AP130 running firmware 6.5.1.0 (6.5r1b). This is very old firmware so I think that is the reason that it is not possible to update in the ExtremeCloud IQ connect. Get the error message: “Device update failed”. Can somebody help me to manually update this accesspoint to the newest firmware? I think I need the firmware files and a guide how to do this.

The accesspoint is stabil reply with ping, but the led turns on and off.

Would appriciate any help for this problem. Thanks. 🙂 

[ej]

OK thank you. It is just that I think it is better with constant light and that this light is just enough to light up the room it belongs if you want must go up during the night etc,, ;-). But it is not a big deal, just find it strange that some avvesspoint do have constant light and other have blinking. There should be a way within the GUI to set these settings... 

[SamPirok]

I’m not finding a way to do that in the GUI. The closest I can see is adjusting the brightness of the LED in the additional settings of a Network Policy, but I believe that would still have the LED flashing on briefly and then off for a majority of the time. I’d recommend reaching out to your SE with a feature request to see if we can add that in to the GUI. 

That said, the LED blinking behavior is to prolong the life of the LEDs, can I ask why you want to disable that? 

[ej]

Hey @Sam Pirok 

Is there a way to turn of the blinking LED to have bright light constantly within the ExtremeCloudIQ portal and not use CLI commands?

[SamPirok]

Apologies for not getting back to you quickly Erik, I was out of the office yesterday. Glad you were able to find a fix, thanks for letting us know.