o Block application on AP Wired Interface

[Justme555]

Hi, 

I have followed these steps to block an application on an SSID fine..

https://community.extremenetworks.com/t5/aerohive-migrated-content/how-do-i-block-applications-on-a-...

However If I have a computer plugged into the 2nd wired interface of an AP4020 as an 'Access Port', there is a way to configure the firewall for this port in the same way So I can block certain applications?

Thanks

[Justme555]

Or is there a way to apply a firewall rule to a device?  Ie, block a certain application either if its connected wireless or wired?

[Nithisha]

Hi , 

Regarding blocking applications on the AP’s wired interface: this is not supported.

Application-based filtering can be applied only to client traffic, and only after it has been processed by the forwarding engine. As a result, the traffic will still arrive at the AP before any application-level blocking is enforced.

https://extreme-networks.my.site.com/ExtrArticleDetail?an=000098583

Regards,

Nithisha