x430 (1G uplink) "classroom layer" [184.108.40.206] - connects Kramer VP-773A, Crestron MPC-M10, Epson Projector, HP PC, and spare ethernet for laptop in every classroom (200+ district-wide), a few (<5) have a Mitel phone plugged in
Interswitch edge devices of interest include:
3935i/3965i APs in lacp lags
Mitel 5304 (no PC port), 5320/5330/5360 (includes PC port) IP Phones
Access edge devices of interest include:
Avigilon IP Cameras
IP Intercom Devices
IP Physical Access Control Devices
IP Building Management (BMS) Devices
Digital Signage Devices
My S4 STP config is very simple:
set spantree priority 0 0
set spantree adminedge ge.X.xx true (where access edge device)
Can you elaborate on this? Is this documented somewhere? This seems like the best solution, but I am not seeing the way to it. I have policy fully deployed and identifying interswitch devices by mac. I am using Control, Manage, and Policy. Is it possible with these two products?
The EXOS equivalent of spanguard is "edge safeguard". Please take a look at the link below. By configuring user ports as "edge ports", you will also prevent the topology changes initiated from end-devices such as PCs, phones, IP cams each time they plug-unplug to the network.