The Mgmt port on all my Enterasys Switches are on a non default VLAN (99), how do I get a X430 to change its Mgmt from VLAN 04095 to 99

[DWAYNE_LOVELY]

I have the Management port on all my Enterasys Switches on a non default VLAN (say 99), how do I get a New Extreme Summit X430 to change its Management from VLAN 04095 to 99? Then send it as tagged/egress across port 8 connected to a Point-to-Point wireless tunnel with several other VLANs so that I can manage it from my Console? With WiFi dual wired connections to the physical port is obviously not an option.

[Drew_C]

In your "configure radius" command, specify the default VR instead.
http://documentation.extremenetworks.com/exos/exos_21_1/exos_commands_all/r_configure-radius-server-...

code:

# configure radius mgmt-access primary server 192.168.25.189 client-ip 172.16.2.93 vr vr-default

[dflouret]

Muhammad, vlan default has no tag configured. The 4095 you see is an internal tag used by EXOS for vlans that don't have a tag configured. You can add a tag to default using the command
configure vlan default tag xxx
Regarding the error message, can you copy here the command that generates it?

[Muhammad_Younas]

Thank you very much for your prompt response. What i want is to configure another VLAN (e.g 55) for management rather than using default with 4095 tag. The reason is that the gateway is Cisco 6500 switch which connects the extreme switch via a trunk port carrying multiple VLAN. Since i cannot create the VLAN 4095 on Cisco, i have to configure another VLAN for management. While configuring radius authentication, the switch prompts me with the error message "Error: IP address 172.16.2.93 is not configured in virtual router "VR-Mgmt".

We really appreciate your solution.

[dflouret]

Muhammad, all our documentation can be found in http://www.extremenetworks.com/support/documentation/. There you'll find the user guides for the latest releases of EXOS (among other things).

If you need documentation for older versions check here: http://www.extremenetworks.com/support/documentation-archives/

I don't quite understand your problem with RADIUS. Can you give more detail please?

[Muhammad_Younas]

Hi,

thank you for the useful tip. Saved my day. Two things, the above URL is not accessible and what if i use the non-mangement VLAN for RADIUS authentication because when i configure the switch for RADIUS, it prompts me that the configured IP is not of mgmt vlan. Please help as i have to deploy me switches. Switch mode is X440-48t.

Thanks