cancel
Showing results for 
Search instead for 
Did you mean: 

Where to download legacy firmware (EOS)?

Where to download legacy firmware (EOS)?

aloeffle
Contributor
Dear all.

On and off I need specific legacy firmware versions for Enterasys devices running EOS. C-Series, B-Series, etc.
Since we have a new portal, I do not find all the old versions for all legacy EOS products.

Some are there, but not all.

d2e68f5a85a8466a99c286f46851c0bb_RackMultipart20170829-85575-go703z-extremednld_inline.jpg



For example C2/3 and B2/3 are missing.

Where to download firmware for these models?

thanks and best regards
Alexander
45 REPLIES 45

Thanks!! You've been great!

Matt26
New Contributor II
Drew, I think you may have started something here...

Rich_Pacheco
New Contributor III
Hi Dantecl,

If you stack the C3's, I believe you should be able to copy the code from one to the other using the follwoing command.

set switch copy-fw destination-system

and then reset

Good luck,
-Rich P.

Glad you got it working. 06.61.11.0002 is the latest C3 firmware I have deployed..

Rich,

Pre-6.42 FW will not stack with 6.61, thus can't copy the FW that way. Luckily the one with 6.61 had 6.42 as a backup firmware, booted that, stacked and upgraded the 6.03, then upgraded it again to 6.61.

Was 06.61.11.0006 the latest firmware released for C3 or is there something newer out there?

GTM-P2G8KFN