cancel
Showing results for 
Search instead for 
Did you mean: 

Where to download legacy firmware (EOS)?

Where to download legacy firmware (EOS)?

aloeffle
Contributor
Dear all.

On and off I need specific legacy firmware versions for Enterasys devices running EOS. C-Series, B-Series, etc.
Since we have a new portal, I do not find all the old versions for all legacy EOS products.

Some are there, but not all.

d2e68f5a85a8466a99c286f46851c0bb_RackMultipart20170829-85575-go703z-extremednld_inline.jpg



For example C2/3 and B2/3 are missing.

Where to download firmware for these models?

thanks and best regards
Alexander
45 REPLIES 45

James_A
Valued Contributor
Interesting, July 2017 is well over a year past the advertised end of support. Maybe it was done for a special customer. There's an official G3 (end of support in September 2019) release of 06.61.18 so it probably wasn't too hard for them to build it. What is odd is there's the heritage products section with N-Series and E1 firmware, but no [bc][23] firmware despite those products being newer.

I think it was, I managed to get hold of the release notes for exactly that as you can see here:
https://www.dropbox.com/s/hvljrjnw8bg41gs/9038338-19_B3_Firmware_RN_6.61.18.0001.pdf?dl=0

James_A
Valued Contributor
I don't believe 06.61.18 was ever released for B3 - 06.61.15 was the last release before end-of-support, there is a debug version 06.61.15.6104D that was generated for a case of mine shortly before then.

I know I'm asking a lot, but by any chance do you have a way to obtain the 6.61.18 version for a B3 switch?

Thanks again!

Matt26
New Contributor II
Thanks James, you're a legend.
GTM-P2G8KFN