ERS3600 SNMPv3 Configuration

[Malik]

Does the ERS3600 support SNMPv3 ?

[Miguel-Angel_RO · Accepted solution]

Hi Malik,

Here a TCL script I use with XMC for BOSS switches.
It should do the trick:

# ALL ERS
enable
conf t
# syslog
CLI logging remote address 10.10.12.12
CLI default logging remote secondary-address
# snmpv3
CLI !snmpv2
CLI snmp-server enable
CLI default snmp-server community
CLI no snmp-server community rw
CLI no snmp-server community ro
CLI snmp-server community public ro
CLI default snmp-server host
CLI snmp-server host 10.10.12.12 v2c readview inform
CLI !snmpv3
CLI no snmp-server view HelpDeskInterfaceAdmin
CLI snmp-server view HelpDeskInterfaceAdmin +ifAdminStatus +ifAlias +pethPsePortAdminEnable +bnIfExtnAutoNegotiationExtAdv +rcVlanPortMembers +rcVlanPortDefaultVlanId +rcVlanPortPerformTagging +rcPortAutoNegotiate
CLI no snmp-server view AllObjects
CLI snmp-server view AllObjects +1
CLI no snmp-server user helpdesk
CLI no snmp-server user networkadmin
CLI snmp-server user helpdesk sha AUTHCRED aes PRIVCRED read-view snmpv1Objs write-view HelpDeskInterfaceAdmin notify-view snmpv1Objs
CLI snmp-server user networkadmin sha AUTHCRED aes PRIVCRED read-view AllObjects write-view AllObjects notify-view AllObjects
###################
# FOR ERS 4K ONLY #
###################
IF ($deviceType eq "ERS4850GTS-PWR+" || $deviceType eq "ERS4826GTS-PWR+" || $deviceType eq "ERS4950GTS-PWR+" || $deviceType eq "ERS4926GTS-PWR+") THEN
CLI no snmp-server notification-control lldpRemTablesChange
CLI no snmp-server notification-control linkDown
CLI no snmp-server notification-control linkUp
CLI no snmp-server notification-control lldpXMedTopologyChangeDetected
CLI no snmp-server notification-control nnMstGeneralEvent
CLI snmp-server notification-control bsnLoginFailure
ENDIF
############
CLI wr mem
CLI exit

[Malik]

 Thank you Ludovico for your answer.

Can you provide me with the SNMP V3 configuration command?

[Ludovico_Steven]

yes