restore config from backup

[Isar1]

Hi,

I'm trying to transfer a backup from a 3549GTS-PWR+ to another 3549GTS-PWR+, but I get an error “Cannot use configuration data from a different type of Baystack module.
Operation aborted.”

I use FW:5.3.0.10 and SW:5.3.12.009 on both switches.

The only difference I see is that one is HW:03 and the other is HW:06

Is this the Problem?

Thx for your answers

[Isar1]

It looks like ascii code

This was the command

copy config tftp address x.x.x.x filename switch1.txt

[SamPirok]

Thank you for letting me know they are not stacked. Could you also tell me if you are transferring the ascii or the binary configuration? 

[Isar1]

Hi Sam,

No both switches are stand alone.

% Switch not in stack.
*****IP Configuration*****
 

My first steps for the new switch was a factory reset and then an update to the latest software version.

After that i give it a new ip to connect to the TFTP

To save the config of a device and to play back on it self works.

[SamPirok]

Hi there, could you tell us if the switches are in a stack? Also, are you transferring the ascii or the binary configuration?