BD8810 individual modules MAC addresses

[DH1]

Hello, Is it possible to pull the MAC address from each individual module? All I can seem to get is the chassis MAC address and we need to know each modules MAC for our VOIP system to map L2 port MAC and Port # to the correct CESID.

[DH1]

Our phone system is seeing multiple devices on the same port since it cannot decipher between 1:1 and 2:1,3:1 etc..

I'm thinking this is a limitation of our phone system not being able to recognize the difference.

[BradP]

HI DH,
Are you seeing multiple MACs coming from the switch? My understanding is that the switch should only use the same (chassis) MAC for all packets sourced from that switch.
Thanks
Brad